It is important that all aspects of installing underfloor heating are actioned correctly and so, below are some guidelines for notching the joists when fitting water underfloor heating systems with a suspended wood floor. We also recommend that you always check with your builder for the correct procedure. 1. Holes should only be drilled on […]
Most of the heating from a water underfloor heating system is in the form of radiant heat. This is why the comfort levels are very high. Radiant heat is one of the best forms of heating. Our system is suitable for domestic and commercial buildings. We can supply our wet underfloor heating system to all […]
Underfloor Heating Systems Ltd are supplying a wet underfloor heating system for a customer in central London. The project is for a ground floor area covering 70m². The floor construction is a concrete screeded floor. The underfloor heating pipes will be fitted on top of 75 mm high density Kingspan insulation. Our underfloor heating clips […]
Any boiler used for wet underfloor heating needs to be sized correctly. There are many heat sources that can be used for water underfloor heating systems. See page three on our quote for the maximum heat output from a water underfloor heating system. Normally 3 kW output should be added for the hot water demand. […]
Here at Underfloor Heating Systems Limited we use Reliance Water Controls underfloor heating mixing valves for our wet underfloor heating systems. The underfloor heating pump is made by Grundfos. The underfloor heating mixer is the ThermoMix mixing valve, one of the best mixing valves on the market. The underfloor heating mixing valve can be mounted […]
The normal procedure for installing wet underfloor heating is as below; 1. Fit the underfloor heating insulation. Check that perimeter insulation has been fitted. Tape all the joints. 2. Install the water underfloor heating manifold on the wall and connect the underfloor heating water pump pack to the manifold. 3. The underfloor heating wiring centre […]
According to a recent report the water underfloor heating market will continue to grow in 2012. The house building sector should see an increase in projects in 2013. Self build market is one of the largest user of underfloor heating systems. As heat pumps sales are increasing every year, it is natural that there is […]
Wet underfloor heating is not a new idea in the UK. The Romans where using hot air as an underfloor heating system many years ago. Today’s modern water underfloor heating systems allows the floor to become one large radiator. The system will operate at very low water temperatures so the floor surface temperature will be […]
Our wet underfloor heating manifolds are made of stainless steel. The underfloor heating flow manifold comes with flow meters that can be adjusted and the underfloor heating return manifolds comes with options for electric actuators to be fitted. The water underfloor heating manifolds comes with ports available from 2 – 12 circuits and are fully […]
Underfloor heating systems can also called Hydronic systems, especially in the United States. Most underfloor heating systems would use either PEX, PEX/AL/PEX, PB or PERT pipe for the wet underfloor heating pipework. Copper pipework are not used for modern wet underfloor heating systems as the copper would react with the screed and would result in […]
